EX_SINE.C
---------------------------------------------------------------------------
/////////////////////////////////////////////////////////////////////////
//// EX_SINE.C ////
//// ////
//// This program demonstrates digital to analog conversion by ////
//// using the RTCC (timer0) and the Max517 chip to generate a ////
//// sine wave with a period of 10Hz. ////
//// ////
//// Configure the CCS prototype card as follows: ////
//// Connect Max517 pin 1 to scope (output) ////
//// Also make the following connections: ////
//// Max517 pin Protoboard ////
//// 2 27 gnd ////
//// 3 2 C1 (also use pull up resistor) ////
//// 4 1 C0 (also use pull up resistor) ////
//// 5 28 +5V ////
//// 6 28 +5V ////
//// 7 28 +5V ////
//// 8 28 +5V ////
//// See additional connections below. ////
//// ////
//// This example will work with the PCB, PCM and PCH compilers. ////
//// The following conditional compilation lines are used to ////
//// include a valid device for each compiler. Change the device, ////
//// clock and RS232 pins for your hardware if needed. ////
/////////////////////////////////////////////////////////////////////////
//// (C) Copyright 1996,2001 Custom Computer Services ////
//// This source code may only be used by licensed users of the CCS ////
//// C compiler. This source code may only be distributed to other ////
//// licensed users of the CCS C compiler. No other use, ////
//// reproduction or distribution is permitted without written ////
//// permission. Derivative programs created using this software ////
//// in object code form are not restricted in any way. ////
/////////////////////////////////////////////////////////////////////////
#if defined(__PCB__)
#include <16c56.h>
#fuses HS,NOWDT,NOPROTECT
#use delay(clock=20000000)
#use rs232(baud=9600, xmit=PIN_A3, rcv=PIN_A2) // Jumpers: 11 to 17, 12 to 18
#elif defined(__PCM__)
#include <16c74.h>
#fuses HS,NOWDT,NOPROTECT
#use delay(clock=20000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7) // Jumpers: 8 to 11, 7 to 12
#elif defined(__PCH__)
#include <18c452.h>
#fuses HS,NOPROTECT
#use delay(clock=20000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7) // Jumpers: 8 to 11, 7 to 12
#endif
#include
byte CONST SINE_WAVE[200] = {
128,132,136,139,143,147,150,154,158,161,165,169,172,176,179,
182,186,189,192,195,199,202,204,207,210,213,215,218,220,223,
225,227,229,231,233,235,237,238,240,241,242,243,244,245,246,
247,247,247,248,248,248,248,248,247,247,247,246,245,244,243,
242,241,240,238,237,235,233,231,229,227,225,223,220,218,215,
213,210,207,204,202,199,195,192,189,186,182,179,176,172,169,
165,161,158,154,150,147,143,139,136,132,128,124,120,117,113,
109,106,102,98,95,91,87,84,80,77,74,70,67,64,61,57,54,52,49,
46,43,41,38,36,33,31,29,27,25,23,21,19,18,16,15,14,13,12,11,
10,9,9,9,8,8,8,8,8,9,9,9,10,11,12,13,14,15,16,18,19,21,23,
25,27,29,31,33,36,38,41,43,46,49,52,54,57,61,64,67,70,74,77,
80,84,87,91,95,98,102,106,109,113,117,120,124};
byte sine_index;
#int_rtcc
isr() {
set_rtcc(0x66);
write_dac(SINE_WAVE[sine_index]);
if(++sine_index==200) {
sine_index=0;
}
}
void main() {
setup_counters( RTCC_INTERNAL, RTCC_DIV_16);
enable_interrupts(INT_RTCC);
enable_interrupts(GLOBAL);
while (TRUE) ;
}
---------------------------------------------------------------------------